Powerboard MINI can make it possible for you...
Powerboard MINI is an IoT board which will help to build IoT product very quickly. You can use it to give the command to your things, and it will react as you programmed, no matter where you are. You can plug-in it with your things and play with it. It is specially designed & developed to build amazing IoT product idea. Isn’t it?
If we are talking about the size of device then you can see the beauty of our Powerboard MINI. It is thinner, lighter and compact for big things. It has a new standard for portable microcontroller devices with built in WIFI module. We have designed & developed in such a way that will help you to use it in a small place and get high outcomes from it.
If you are a Developer want to build amazing IoT things then you can use it runs on your things with the help of Powerboard MINI. You can bring it from us and setup your code as you want to get result from the things. Once you done, you can play with it. It is very easy to integrate with your device.
If you are an Entrepreneur or Business Man and having big IoT idea you can contact us at email@example.com we will walk with your journey and make your things live for the world to use it. If you want to build something extraordinary you can contact us and will help you to figure it out.
Heart of Powerboard MINI is an ESP8266 WIFI microcontroller which has clocked 80 MHZ at 3.3V logic. ESP8266 also integrates an enhanced version of Tensilica’s L106 diamond series 32-bit processor, on-chip SRAM besides the WIFI functionalities. ESP8266 is often integrated with the external sensor and other application specific devices through its GPIOs.
You can program the microcontroller using the Arduino IDE. It is very easy and lightweight. We have wired up a USB-Serial chip that can upload code at a blistering 921600 baud for faster development. It has auto reset so you no need to nodding with pins and pressing reset button.
2.4 GHz, 80 MHZ at 3.3V logic
Very easy and lightweight
Fulfilling developers need
Micro USB connector
Easier to connect with 3.7V batteries
GPIO pins Availability
Reliable to set with any device
General purpose pins
Reset the module
A/D conversion. IV range 0-1v, Scope : 0-1024
Chip enable pin. Active high
Wake up the chipset from deep sleep mode.
3.3V power supply (VDD)
MTDO; HSPICS; UART0_RTS
Common ground for all power and logic
Positive voltage from the JST jack for the optional LI-PO battery
Positive voltage from the micro USB jack if connected
3.3V regulator’s enable pin, connected to ground to diable the 3.3V regulator
Output from 3.3V regulator. Supply 500mA peak (try to keep your\ current draw under 250mA.)
Compact and flexible